From the outset of the Torch 3.0 Road shoe design process our goal was to create a performance offering as feature-packed as any top-end shoe. The challenge however was pulling this off at a palatable price.

In order to achieve this we utilized three strategically placed materials on the uppers that are welded together—TPU and mesh in the front and synthetic leather in the rear. This makes for a more comfortable and supportive front of the shoe. A stiff rear and heel cup meanwhile lock down your heel and keep all of your watts going into the pedals as efficiently as possible. This refined upper is combined with our legendary FACT carbon fibre sole to further ensure an efficient power transfer. Finally we topped the Torch 3.0 off with two BOA’s new Li2 dial for zonal closure and a precise fit that leads to all-day comfort.

• Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment.
• FACT™ carbon composite sole and torsion box construction is directionally rigid for outstanding power transfer: Stiffness Index 8.5.
• BOA’s new Li2 dial platform brings a sleek, low-profile design, unprecedented durability, and improved sustainability to the L-SERIES. With incremental micro-adjustability, Li2 delivers micro-adjustable precision fit engineered to perform in the toughest conditions.
• Mesh, TPU, and synthetic layer upper are placed in specific zones for comfort and lock-down, and are thermobonded for a superior fit.
• Standard Fit for support and all-day comfort.
• Three-bolt cleat pattern fits all major road pedals.

• Align II earned the highest 5-Star Virginia Tech® Helmet Rating™ from internationally renowned Virginia Polytechnic Institute and State University.
• The MIPS system is a low-friction layer that allows a sliding motion of 10 to 15mm in all directions. Studies indicate that this reduces some of the rotational forces transmitted to the brain during angled impacts.
• Easily-adjustable, one-size Headset SX fit system is designed for easy and accurate fit for a wide range of head sizes. Add in a micro-adjustable dial for on-the-fly adjustability and you're ensured an easy, secure, and accurate fit.
• 4th Dimension Cooling System optimizes ventilation.
• In-molded shell improves strength and reduces weight.
• Reflective decals for increased visibility in low-light conditions.

• MIPS-equipped.
• Easy-adjust, HairPort FSL II fit system with four height positions and micro-adjustable dial.
• 4th Dimension Cooling System with Mega Mouthport for enhanced comfort.
• Composite matrix internal reinforcement allows larger vents for greater cooling.
• Soft 4X DryLite webbing material won’t stretch out with sweat or water.
• Tri-Fix web splitter for improved comfort and ease of strap adjustments.
• Our available aftermarket ANGi sensor gives you and your loved ones peace of mind like never before. When combined with our Specialized Ride app, the ANGi sensor will evaluate the forces acting on the helmet in the event of an accident and, if necessary, send a text message to your specified contacts with your location.

Protect your pride and joy!

The Muc-Off Tubeless Tag Holder offers a discreet way to install a tracker inside your rear tubeless bicycle tire in conjunction with our Tubeless Valves, meaning you can track down your bike down in the event of theft and can locate it using the Find My iPhone App.

Your tracker will be housed in a protective, 3-part silicone and rubber tubeless valve mount and supplied with our range of tubeless valve bases, so you can ensure an airtight seal is achieved against your rim when installing inside your tubeless tire.

Please note: AirTag Tracker & Tubeless Valves are not included with the mount, sold separately.

• FACT carbon construction offers an optimized blend of durability and light weight.
• Ergonomic top perch alleviates pressure on hands.
• Shallow bend drop design.
• UCI legal, compatible with Shimano, SRAM, and Campagnolo controls.
• Front of bar optimized for dual-cable routing.
• Weight: 200g (42cm)
• Clamp Diameter: Oversized 31.8mm
• Bar Width (center-to-center): 36/38/40/42/44cm
• Shallow Bend Drop: 123mm drop x 75mm reach
• Not compatible with clip-on aerobars.

• Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.
• Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness index 6.0
• Welded upper reduces seams for superior step-in comfort.
• BOA® L6-Snap dials for on-the-fly micro-adjustment.
• SlipNot™ rubber tread for confident traction on all terrain.
• Two-bolt cleat pattern fits all major MTB pedals.
• Approximate weight: 357g (1/2 pair, Size 42)

• Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.
• Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling (stiffness index 6.0)
• SlipNot™ rubber tread for confident traction on all terrain.
• Two-bolt cleat pattern fits all major MTB pedals.
• Approximate weight: 331g (1/2 pair, Size 42)

NEVER MISS A BEAT

• With clean lines and rugged construction, Planet Bike's Aluminum water bottle cages offer lightweight durability.
  
• Standard bread-and-butter bulk cage
  
• 6.2mm alloy tubing

• Reinforced composite material improves durability without adding weight.
• Side-loading design allows for secure bottle retention with easy in-and-out accessibility for frames with a compact bottle mounting area.
• Right-hand loading on the down tube—left-hand loading on the seat tube.
• Sleek, minimalist design with razor-sharp graphics.
• Accepts EMT Cage Mount Tool.
• Accepts MTB XC Kit Storage Box (on applicable Epic, Stumpjumper HT, and Diverge models).
• Weight: 43g

HIGHLIGHTS

HIGHLIGHTS

The PRO Mini Tool 10 Functions is a compact multitool with 10 functions.

Designed to provide you with a better sports’ bicycle experience the PRO Mini Tool 10 Functions boasts 10 functions housed in a compact resin body. The hardened steel bits included in the tool are: Hex 2/2.5/3/4/5/6/8, Torque 25; as well as a PH2 and a Flat screwdriver.

HIGHLIGHTS

HIGHLIGHTS

Details

When the wet weather arrives, get ready to rock with the Muc-Off Rear Ride guard. Don’t let mud and spray get in the way of a good time when you’re shredding the trails or commuting to work. This mudguard is lightweight, stealthy and super easy to fit to your bike – plus it looks rad too.

• Step 1 - Feed the attached zip tie through the 'IN' slot and back through the 'OUT' slot
• Step 2 - Fold the two outside edges and the centre fold downwards along the fold lines to stiffen the guard 
• Step 3 - Push the guard and zip tie over the top of the rail on the rear of the saddle
• Step 4 - Tighten the zip tie around the rails ensuring the zip tie fits inbetween the slot on the edge of the guard.
• Step 5 - When you have tightened the zip tie firmly cut to length ensuring you have at least 30mm to retension if required.

Tired of your front wheel hurling muck into your face whilst bombing it down the trail? We’ve got the answer. Lightweight and stealthy, the Muc-Off Ride Guard keeps mud fling at a minimum.

NEW F-1 Series Float Grips are made from our exclusive A.I.R.E. compound which infuses air into the grip reducing weight by over 30% and providing a slower rebound and response for improved comfort.

PRODUCT FEATURES:

• Medium diameter (31.5mm)
• Reinforced inner layer for added durability
• Micro-Textured Surface Pattern improves tackiness and control
• Smooth Profile for a consistent feel
• Available in 4 color options
• Made in the USA

• Integrated top plate for quick-mount MTX and RX trunk bags
• Integrated fender top
• 6061-T6 alloy construction
• 625g
• 55lb weight capacity

One level up in cushion from chucksgrips®, RACE model. chucksgrips® PLUS is a cushier ride without a lot of added weight.

• Twist design allow CO2 cartridge to be threaded into head and then unthreaded to start CO2 flow.
• Flow can be controlled or stopped by threading cartridge back into head.
• Includes plastic spacer that allows head to be mounted for storage on cartridge without piercing it.

• 100% Recycled Polyester Wind Shell provides a sustainable solution to wind resistance on any ride.
• 100% Recycled Polyester Wind Shell provides a sustainable solution to wind resistance on any ride.
• Lightweight fabric and minimal construction allows vest to be packed into your jersey pocket when it isn't needed.
• Fabric Content: MAIN: 100% Polyester Woven, BACK: 82% Nylon, 18% Spandex Knit Mesh
• Back mesh panel allows for maximum ventilation as your body builds up heat and energy inside the jacket.
• Slim Fit closely and precisely conforms to the curves of the body, ensuring an unrivaled level of fit. and comfort, while still allowing room for a jersey or baselayer underneath.

SP TACTIC 3 PADSET

SP MNDST II FIT SYS PREVAIL II

SP PROPERO 3 HEADSET FSL II FIT SYSTEM

The NiteRider® Lumina™ Handlebar Strap Mount offers a wide variety of handlebar size fitments (up to 35mm) and remains securely in place while riding through varying types of terrain. It’s easy to install and, like all of our mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended.

SYSTEM COMPATIBILITY
• Lumina™ Series
• Mako Series
• MiNewt Cordless Series

Fits up to 35mm Handlebars

DESCRIPTION
Helmet mount for all systems that use the slider mounting clip. Not compatible with Lumina Series lights.

SYSTEM COMPATIBILITY
• Pro Series
• HID Series
• Classic Plus & Select
• Evolution & Digital Evolution
• HeadTrip & Digital HeadTrip
•TrailRat & TrailRat Select
• RoadRat
• Digital Patrol
• Pre 2001 Systems

ACCESSORY INCLUDES
Pro Series Low Profile Helmet Mount

*Run time specifications may vary

Its dual LED set-up puts out enough light at 1800 lumens to be more than capable navigating the toughest off-road terrain, while being nimble and versatile enough to tackle those long and arduous paved commutes.

Note: The NiteRider® Lumina™ 1800 Dual is shipped from the factory in Lock Out Mode. This mode feature is designed to save battery power by preventing the head light from accidentally turning on while in storage. Simply press and hold power button 8-10 seconds to lock / unlock.

FEATURES

•  Lumen Output: 1800

•  7 Modes with Run Times: 0:45 – 20:00hrs

•  Charge Time: 3:00hrs

•  Weight: 258g

•  Battery: Li-Ion

•  Low Battery Indicator with Boost Mode Indicator
•  AC Adapter / Charger
•  Side Lighting Visibility
•  Water / Dust Resistant IP64 Rated

RUN TIMES*
Low - 6:00h at 350 Lumens
Med - 3:00h at 700 Lumens
High - 1:30h at 1500 Lumens
Boost - 0:45h at 1800 Lumens
Pulse Flash - 10:00h at 1500 Lumens
Fast Flash - 16:30h at 1500 Lumens
Walk Mode - 20:00h at 100 Lumens

*Run time specifications may vary

• Combines a lightweight carbon fiber shell, structurally specific polycarbonate backing, and five optimized pieces of targeted density foam (patent pending) for reduced weight, optimized fit, and increased ventilation. ASTM DH (1952) certified.
• Tune a more precise, personalized fit thanks to Gambit’s adjustable Integrated Fit System that accommodates variations in head shape and occipital base.
• Occipital base adjustment personalizes fit for comfort and allows you to tune helmet angle to ensure that your helmet and eyewear stay perfectly synched.
• 4-position adjustable cheek pads provide fit refinement for any head shape.
• Integrated, fixed visor with a breakaway feature provides a wide field of view while protecting against trail debris.
• Average weight: 640 grams (medium).
• Increased airflow and improved ventilation from the SBC Integrated Fit System does away with the excessive padding of a traditional full-face friction fit.
• MIPS SL with our exclusive perforated backing integrates MIPS technology within the helmet padding and reduces moisture retention while increasing breathability.
• Computational Fluid Dynamic design integrates the maximum volume of internal channeling for optimal airflow through the helmet. 4D brow cooling provides a gap between the helmet and forehead, drawing airflow into internal air channels at every speed.
• This helmet is ANGi ready, with a fit system mount designed for easy integration with our ANGi crash sensor.

• Enlarged front vents help increase ventilation.
• Rear Diffuser for aero and ventilation benefits.
• MIPS Air Node is MIPS’ most ventilation-focused solution.
• Adjustable Tri-Fix web splitter boosts comfort through personalized fit.
• Precision, full-wrap polycarbonate shell for increased durability and premium finish.
• Dual-density optimized EPS foam.