Herramientas

Compact and Dependable

Covers the basic tools needed for quick and easy cockpit and shifting adjustments. Also, great for checking common bolts for tightness. The Grid 8 is built to last and backed with our lifetime guarantee.

• SPECS
• Weight110 grams
• TOOLST25, T30 TORX BITS, 2.5, 3, 4, 5, 6MM ALLEN BITS, FLATHEAD SCREWDRIVER

Bicycle maintenance is often delicate, precision work. Having an ergonomic allen wrench set or torx bit set in the palm of your hand is an ideal resource for any mechanic. We offer 2 unique Fixed 3-Way allen wrench sets (2, 2.5, 3mm & 4, 5, 6mm) and 1 Fixed 3-Way torx bit set (T25, T27, T30). With these three tools alone, installing bike accessories or making component adjustments is quick and simple. Available individually, or find them in our Team Edition and Ride Prep Tool Kits.

• 2 / 2.5 / 3mm Allen wrench set
• 4 / 5 / 6mm Allen key set
• T25 / T27 / T30 Torx bit set
• Ergonomic, overmolded rubber grip for comfort and precision
• Durable polymer core creates a flex-free platform for confidently turning tight bolts
• Hardened CRV tool steel maintains precise contact edges
• Suitable for low and high torque adjustments on bicycle-specific components
• Found in our Team Edition and Ride Prep Tool Kits
• Limited Lifetime Warranty

Folding 5-12 speed compatible chain tool even works with Campagnolo chains that requiring peening. Smooth and powerful, this handy take along is encased in a stainless steel shell, which becomes a comfortable handle when opened.

• Includes peening anvil that allows for peening of Campagnolo11-speed chains, which pivots out of the way when not in use
• Cast steel body with stainless steel case
• Replaceable pin (part # 985-1)
• Compatible with Sram Eagle hollow pin chains
• 5-12 speed chain tool

Park bottom bracket tools for installation and removal of 16 notch bottom brackets.

• Made from high precision, hardened chromoly steel the BBT-19.2 can be turned with a 3/8" drive wrench, 1" wrench or Park Tool FRW-1 Freewheel Remover Wrench
• For installing & Removing Shimano, Truvativ, Race Face, FSA, Sram & Campagnolo 16-notch external bearing 44mm OD bottom bracket cups
• Fits most thru-axle Centerlock lock rings

Properly installs Ritchey carbon bars and stems with no risk of overtightening.

• May work with other brands - check manufacturer's torque recommendations
• Ritchey recommends using Liquid Torque on clamping surfaces of lightweight components
• Preset 5Nm torque key
• Includes 3, 4, and 5mm hex keys, T20, T25, and Phillips #1
• Bit holder included

Park Spoke Wrenches are precisely sized for the spoke nipple and made from durable materials that provide years of dependable use.

• Professional quality, precision-sized spoke wrenches are hardened and nickel plated for long service
• Vinyl coated in one of 5 colors to indicate size at a glance
• Fits European style nipples .130"/3.30mm

The ultimate trailside companion – these high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold.

    Lifetime Warranty
    Hex wrenches : 2, 2.5, 3, 4, 5, 6, 8mm
    Screwdrivers : phillips #2, flat #2
    Torx : t-25
    Chain tool : 8/9/10 speed compatible
    Spoke wrench : #0, 1, 2 & 3

Sprocket remover/chain whip made from heat treated steel and a molded handle for comfort.

    15" long for extra leverage and vinyl coated handle for comfort
    Works on 1/8" fixed gear sprockets and single speed cassettes
    1" (25.4mm) box-end wrench fits Park Tool freewheel/cassette lockring tools

Bottom bracket tools intended for both shop and consumer use.

    Used to remove and install all Shimano ISIS Drive and ISIS Overdrive eight-notch bottom bracket cups
    36mm wrench flats
    Compatible with Bosch Active Line, Active Line Plus, and Performance Gen 3

Crank Puller for Square tapered Cranksets.

    Fits all cranks using 22mm x 1 threads and square, tapered bottom bracket spindles
    Also fits "Power Spline" cranks from SRAM using the 8mm thread bolt
    Strong rotating tip system ensures smooth operation and long life

Designed to accurately indicate when a chain reaches .5% and .75% which most chain manufactures recommend replacement. Chain wear indicator is a simple go or no go tool.

    Updated to be longer, more accurate and features permanent measurement markings
    Accurately indicates when a chain reaches 0.5% and 0.75%, the points at which most chain manufacturers suggest replacement

Designed specifically for use on all bicycle cables and housing, including hard-to-cut index housing.

    Cold forged, heat treated steel handles for strength
    Built in crimper for cable end caps and forming hole for reforming housing ends and housing ferrules
    Precision ground cutting jaws for a clean cut on every cable
    Wire latch holds handles together when not in use

Makes chainring bolt set installation and removal easy.

    Securely holds the slotted nut to prevent spinning when tightening or loosening the bolt
    Double-ended to fit most slotted-type nuts

For removing and installing cassette lockrings on Shimano-compatible freehub bodies and some Centerlock disc brake systems.

    Fits 12-spline cassette lockrings from Shimano, SRAM, SunRace, SunTour, Chris King and others
    FR-5.2GT incorporates a specially-sized guide pin that stabilizes the tool when removing cassette lockrings from 12mm thru-axle hubs

For removing and installing cassette lockrings on Shimano-compatible freehub bodies and some Centerlock disc brake systems.

    Fits 12-spline cassette lockrings from Shimano, SRAM, SunRace, SunTour, Chris King and others
    FR-5.2G uses a 5mm guide pin designed to fit perfectly inside a Quick-release axle

Park Tool Freewheel Removers are made from durable, heat treated alloy tool steel for long life.

    Thin wall construction allows use without removal of cones and locknuts
    One inch base fits wrench or bench vise
    Removes four-notch BMX / single-speed freewheel from hubs with 1.37 x 24 TPI threads
    For 16t and larger freewheels

Park Tool Hex wrenches made from industrial tool steel, hardened and tempered for shop use.   Available in Y, L-Shape and folding versions

    Wrench Length: 202mm

Park Tool Hex wrenches made from industrial tool steel, hardened and tempered for shop use.   Available in Y, L-Shape and folding versions

    The TWS-3 is a star-shaped Torx compatible 3-way wrench. T10, T25 and T30 wrench sizes in a classic three-way “Y” design
    Useful for disc rotor bolts (T25), chainring bolts (T30), and hydraulic brake work (T10).

Park Tool offers a wide variety of high quality Torx Wrenches for the home or shop mechanic.

    Combines the Torx-style wrench sizes currently being used on bicycle components in a convenient fold-up set
    Multi-position composite handle is lightweight, slip-resistant, and stronger than steel handles
    Includes: T7, T9, T10, T15, T20, T25, T27, T30 and T40 sizes

Park Valve Tools. A small, handy tool designed to remove and install Schrader and Presta valve cores and to remove and install Presta valve extenders with 5mm wrench flats.

    Note: Not all Presta valve cores are removable