Description:

Why We Like The 34 Float 29 FIT4 Factory Boost Fork

We reckon the FOX 34 Float is the most popular fork on the trails. Built for mid-travel trail bikes, this fork is simple to adjust and with Kashima coating offers smooth, low-friction performance. With 3 stellar ride modes dialed in by FOX, we can easily flick a switch before an extended uphill or descent, and keep it right in the middle setting when we're doing our fun local cross-country loop.

Fox has installed a newly machined crown that decreases the weight all while adding a slight bit of stiffness to the ride. New lower leg bleed channels also help with the ride progression, letting excess air escape into hollowed-out channels instead of compromising ride quality. A larger air spring keeps the suspension running smoothly too, so the fork is less susceptible to heat and atmospheric change. With all that tech, we can't help but throw the fork on and enjoy every single rock, drop, gap, and root our trail system has to offer.

·         Top-of-the-line trail fork with Fox's FIT4 damper

·         Equal parts light and stiff for modern trail bikes

·         New model increases stiffness further with a better arch design

·         FIT4 damper offers a 3-position lever to adjust the compression rate

·         Float EVOL spring allows for more air and better progression

·         Kashima coating last longer and offers lower friction

Specifications:

Travel: 130mm, 140mm

Stanchion Material: Kashima-coated aluminum

Lower Material: magnesium

Crown Material: aluminum

Wheel Size: 29in

Steer Tube Diameter: 1.5in taper

Stanchion Diameter: 34mm

Axle To Crown: [130mm, 51mm] 545mm

Rake: 44mm, 51mm

Spring Type: EVOL

Damper : FIT4

Adjustability: Open mode adjust: 22 clicks of low-speed compression, 3-position adjust: Open, Medium, Firm

Axle: 15 x 110mm Boost

Brake Compatibility: post-mount disc

Rotor Compatibility: 180mm - 203mm

Includes: 2 volume spacers, 1 star nut, 1 cable clip

Manufacturer Warranty: limited 1 year

Activity: trail

The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths.

Description:

Why We Like The 34 Float SC 29 FIT4 Remote Adjust Factory Boost Fork

Trail riders looking for a lightweight FOX fork can rejoice with its release of the 34 Float SC 29 FIT4 Remote Adjust Factory Boost Fork. Sporting similar design and weight saving tricks first employed on its 32 Step-Cast Fork a few seasons ago, the 34 is designed to excel on more technical cross-country courses and provides riders seeking the lightest trail-worthy fork available. And while most forks become a bit spindly or lose tire clearance which such weight savings, amazingly the Step-Cast 34 isn't a slave to flex, tracking with authority on demanding trails and clears up to 2.6-inch rubber. Marathon and 24-hour cross-country racers will also appreciate its 3-position handlebar remote that allows for instant efficiency on smoother trails, gravel climbs, and tarmac sections.

·         Trusty down-country Fox 34 adds stiffness for aggressive courses

·         Kashima finish for smooth actuation for longer

·         FLOAT EVOL air chamber means better air volume optimization

·         FIT4 damper brings race quality pre-tuned settings

·         Remote lockout for those long mid-race climbs

·         Stepcast design sheds grams for race day

·         3 Position Push-to-Lock remote lever included

·         Redesigned arch lowers the weight without sacrificing stiffness

Specifications:

Travel: 100mm, 120mm

Stanchion Material: Kashima, aluminum

Crown Material: aluminum

Wheel Size: 29in

Steer Tube Diameter: 1.5in taper

Stanchion Diameter: 34mm

Rake: 44mm, 51mm

Spring Type: FLOAT

Damper FIT4

Adjustability: 3-pos push-to-lock remote

Axle: 15mm x 110mm

Brake Compatibility: disc

Rotor Compatibility: 160mm - 180mm

Includes: 1 cable, 1 housing, 2 barrel adjusters, 3 volume spacers, 1 remote lock out lever, 1 cable clamp

Manufacturer Warranty: 1 year

Activity: mountain bike, trail, cross-country

Description:

Why We Like The 34 Float SC 29 FIT4 Remote Adjust Factory Boost Fork

Trail riders looking for a lightweight FOX fork can rejoice with its release of the 34 Float SC 29 FIT4 Remote Adjust Factory Boost Fork. Sporting similar design and weight saving tricks first employed on its 32 Step-Cast Fork a few seasons ago, the 34 is designed to excel on more technical cross-country courses and provides riders seeking the lightest trail-worthy fork available. And while most forks become a bit spindly or lose tire clearance which such weight savings, amazingly the Step-Cast 34 isn't a slave to flex, tracking with authority on demanding trails and clears up to 2.6-inch rubber. Marathon and 24-hour cross-country racers will also appreciate its 3-position handlebar remote that allows for instant efficiency on smoother trails, gravel climbs, and tarmac sections.

·         Trusty down-country Fox 34 adds stiffness for aggressive courses

·         Kashima finish for smooth actuation for longer

·         FLOAT EVOL air chamber means better air volume optimization

·         FIT4 damper brings race quality pre-tuned settings

·         Remote lockout for those long mid-race climbs

·         Stepcast design sheds grams for race day

·         3 Position Push-to-Lock remote lever included

·         Redesigned arch lowers the weight without sacrificing stiffness

Specifications:

Travel: 160mm, 170mm, 180mm

Stanchion Material: [coating] kashima

Crown Material: aluminum

Wheel Size: 29in

Steer Tube Diameter: 1.5in taper

Stanchion Diameter: 38mm

Rake: 44mm, 51mm

Spring Type: air

Damper GRIP2

Adjustability: high speed compression, low speed compression, high speed rebound, low speed rebound

Lockout: no

Axle: 15mm x 110mm

Brake Compatibility: disc

Rotor Compatibility: 180mm - 230mm

Includes: 1 star nut, 1 hose clamp, 3 volume spacers, 1 sticker

Manufacturer Warranty: limited 1 year

Activity: mountain biking, enduro, downhill, all-mountain

Description

With optimized material concentrated at the brace and seal area, outstanding stiffness and steering precision, axle spec of either 9QR, 15x100mm, or 15x110mm, and available eMTB configured fork options with fender mounting points (OE only), Recon Silver is an all-around performer suited for any MTB or eMTB bike.

Features

·         eMTB endorsement options with short and full fender mounts are appropriate for all e-bikes (15x110mm)

·         Motion Control™ damping featuring Low Speed Compression adjustment to lockout

·         Fast Black finished 32mm steel upper tubes match significant stiffness with a premium look

·         15x110mm versions fit tires up to 2.8" without fenders - use of a full fender will reduce tire clearance

Specifications

Wheel size: 27.5", 29"

Travel: 100mm, 120mm, 130mm, 140mm, 150mm

Steerer: 1.5" Tapered, 1-1/8" Aluminum

Axle: 15x100mm, 15x110mm BOOST™, 9mm Quick Release

Spring: Solo Air

Fork offset: 37mm (27.5"), 42mm (27.5"), 42mm (29"), 46mm (27.5"), 46mm (29"), 51mm (29")

Maximum Rotor Size: 220mm

Upper tube type: 32mm straight wall steel

Max Tire Width (mm): 62, 81

Minimum Rotor Size: 160mm

E-Bike Approved: E-bike Approved, E-bike Approved w/E-MTB Decal

Damper Type: Motion Control

Volume reducer: n/a

Color (FS): Diffusion Black, Gloss Black

Fender Compatibility: Full or Short, 3 point and 2 point mounts, n/a

Description:

The SID SL comes equipped with a race-proven 32mm chassis and features the Rush damper. Ready for any start line.

Features:

·         Proven 32mm chassis focused on light weight for the classic XC bike

·         New Rush damper provides Open or Lockout positions with factory-tuned compression and independent rebound adjustment

·         DebonAir™ air spring is tuned specific to meet the demands of XC and maintains a higher ride height for increased confidence and control

·         Ultra-low friction SKF wiper seals provide long lasting fork performance and improve overall suspension feel

·         Max+ima Plush damping fluid reduces friction and silences damper noise

Specifications:

Wheel size: 29"

Travel (mm): 100mm, 80mm

Steerer: 1.5" Tapered

Axle: 15x110mm BOOST™

Spring: DebonAir

Fork offset: 44mm (29")

Maximum Rotor Size: 200mm

Upper tube type: 32mm straight wall aluminum

Max Tire Width (mm): 60

Minimum Rotor Size: 160mm

E-Bike Approved: E-bike Approved

Damper Type: Rush RL

Volume reducer: 0/3 Tokens, 1/3 Tokens

Color (FS): Diffusion Black, Gloss Black

Fender Compatibility: n/a

Weight (g): 1493

Weight Based On: 100mm travel W/Maxle Stealth

The lightest, fastest fork of 2020, full stop. The SID SL Ultimate features a new Charger Race Day damper, with every extra gram machined away, made for premium style plays.

• 32mm chassis focused on light weight for the classic XC bike
• Charger Race Day Damper - Rockshox's lightest production damper with rock-solid lockout
• DebonAir air spring is tuned specific to meet the demands of XC and maintains a higher ride height for increased confidence and control
• Ultra-low friction SKF wiper seals provide long lasting fork performance and improve overall suspension feel
• Maxima Plush damping fluid reduces friction and silences damper noise
• Machined/anodized crown
• Ultimate foil graphics package
• Remote Adjust

Description:

Premium performance at down-to-earth prices. Judy Silver now has new options available to support compatibility with short and full fenders. Judy Silver TK level forks give you stiff steel upper tubes and TurnKey™ lockout.

Features:

·         New graphics package with E-MTB endorsement option (15x110mm)

·         TurnKey lockout gives 'on/off' control

·         Fits Tires up to 2.8" (15x110mm)

·         Fast Black finished 30mm steel upper tubes couple stiffness and lightweight with a premium look

·         Plush coil spring or highly tunable Solo Air spring

Specifications:

Wheel size: 26", 27.5", 29"

Travel: 100mm, 120mm, 130mm, 80mm

Steerer: 1.5" Tapered

Axle: 15x110mm BOOST™, 9mm Quick Release

Spring: Coil, Dual Position Coil, Solo Air

Fork offset: 40mm (26"), 42mm (27.5"), 42mm (29"), 46mm (29"), 51mm (27.5"), 51mm (29")

Maximum Rotor Size: 185mm, 220mm

Upper tube type: 30mm straight wall steel

Max Tire Width (mm): 58, 62, 81

Minimum Rotor Size: 160mm

E-Bike Approved: E-bike Approved, E-bike Approved w/E-MTB Decal

Damper Type: TurnKey

Volume reducer: n/a

Color (FS): Diffusion Black, Gloss Black

Fender Compatibility: Bolt On - Full or Short

Description:

Premium performance at down-to-earth prices. Judy Silver now has new options available to support compatibility with short and full fenders. Judy Silver TK level forks give you stiff steel upper tubes and TurnKey™ lockout.

Features:

·         New graphics package with E-MTB endorsement option (15x110mm)

·         TurnKey lockout gives 'on/off' control

·         Fits Tires up to 2.8" (15x110mm)

·         Fast Black finished 30mm steel upper tubes couple stiffness and lightweight with a premium look

·         Plush coil spring or highly tunable Solo Air spring

Specifications:

Wheel size: 26", 27.5", 29"

Travel: 100mm, 120mm, 130mm, 80mm

Steerer: 1-1/8" Aluminum, 1-1/8" Steel

Axle: 15x110mm BOOST™, 9mm Quick Release

Spring: Coil, Dual Position Coil, Solo Air

Fork offset: 40mm (26"), 42mm (27.5"), 42mm (29"), 46mm (29"), 51mm (27.5"), 51mm (29")

Maximum Rotor Size: 185mm, 220mm

Upper tube type: 30mm straight wall steel

Max Tire Width (mm): 58, 62, 81

Minimum Rotor Size: 160mm

E-Bike Approved: E-bike Approved, E-bike Approved w/E-MTB Decal

Damper Type: TurnKey

Volume reducer: n/a

Color (FS): Diffusion Black, Gloss Black

Fender Compatibility: Bolt On - Full or Short

The new 1x lever offers improved ergonomics for easier operation on the trail, and it only weighs 33.5 grams, which is 34% lighter than the old version! The 1x lever is Matchmaker and I-SPEC EV compatible (both mounts included).

FOX introduces the Transfer Dropper Seatpost Lever for drop bar applications. Easy operation from either the drops or the hoods means you’ll always be ready for the next feature on your ride. Straightforward and safe installation and setup on both carbon and alloy bars.

• Best in class proprietary combination of ergonomic form and race-critical function
• Installs underneath the shifter
• Dual action – easy to reach from the drops or hoods
• Maintains great clearance for knuckles and shifter levers.
• Band clamp is compatible with carbon or alloy bars
• Works with all mechanical and electronic shifters