Name: SERFAS RX SEALANT 16 OZ.
Brand: CARIBEAN ATHLETIC
SKU: SERFAS SEAL-16
Price: 16.99 USD
Availability: InStock

MUC-OFF Tubeless Sealant

827US

$15.99

A super lightweight tubeless sealant that stops punctures in their tracks. Can be used for enduro, road or downhill bikes to make punctures a thing of the past.

FEATURES

For Downhill/Enduro/Road
Seals tears and holes up to 6mm
Seals porous tyres and bead/rim gaps
Lasts up to 6+ months in temperate climates* and won't ball up
Contains cutting-edge molecules to fill large holes and tears
Includes unique UV detection system that highlights any punctures
Non-corrosive and easy to wash off with water
Ammonia free
CO2 Compatible

Minimum amount per tyre:

(add up to 30ml extra for increased protection)

Road: 30-45ml (2 to 3 scoops)
26" MTB & 27.5": 60-75ml (4 to 5 scoops)
Cross 700c: 60-75ml (4 to 5 scoops)
29" MTB: 105ml-140ml (7 or the whole pouch)
Downhill: 120-140ml (8 or the whole pouch)

*If using in extreme heat (+35°C) simply top up if needed.

HOW TO

Remove all old rim strip or tape and clean rim.
Make sure the rim is clean and dry before applying tape.
Get the tape from the packet and line it up from the opposite side of the valve.
Start by unwinding a small amount of the tape and pressing it down using your thumb or finger to hold pressure down.
Continue to hold while you pull back on the tape and stick down tight once you have a few cm on the tape will stick and holding is no longer needed.
Continue the entire way around the rim (if it has a big concave in you can pull and wiggle the tape to fill any edges)
Overlap the tape by roughly 10 – 15cm
Leave a small amount unstuck so that you can cut the remainder off
Once cut sketch and pull the tape down to create a seal
Go around the rim with your thumb to make sure there is no air pockets or messed areas.
Once your happy with how it looks using a small pin locate the valve hole and cleanly pierce the tape ready for the valve
Grab your tubeless valve and remove the lock ring and o ring
Chose the right rubber fitment for your rim tape and insert valve into rim
Refit O-ring and Lock ring making sure you lock the valve in (don’t go to tight or could damage the rubber)
Re-fit your tyre of choice carful not to damage the tape (by using tyre levers ect)
Inflate tyre to create a fit (should hear some popping around the rim)
Release Air and remove valve core using the spare valve cap
Grab the sealant pouch and give it a shake
Unscrew the cap and fit on the valve in a up right position
While holding the pouch spin the wheel downward so that the pouch is now upside down
Insert the sealant by rolling the pouch down
Spin wheel back up right and remove pouch
Reinsert valve core and inflate to your pressure

Muc-Off Tubeless Sealant

MO6001

$33.99

A super lightweight tubeless sealant that stops punctures in their tracks. Can be used for enduro, road or downhill bikes to make punctures a thing of the past.

The perfect tubeless sealant for Downhill, Enduro and Road cycling.

Seals holes up to 6mm
Lasts up to six months
UV dye to easily find punctures

FEATURES:

For Downhill/Enduro/Road
Seals tears and holes up to 6mm
Seals porous tyres and bead/rim gaps
Lasts up to 6+ months in temperate climates* and won't ball up
Contains cutting-edge molecules to fill large holes and tears
Includes unique UV detection system that highlights any punctures
Non-corrosive and easy to wash off with water
Ammonia free
CO2 Compatible

Minimum amount per tyre:

(add up to 30ml extra for increased protection)

Road: 30-45ml (2 to 3 scoops)
26" MTB & 27.5": 60-75ml (4 to 5 scoops)
Cross 700c: 60-75ml (4 to 5 scoops)
29" MTB: 105ml-140ml (7 or the whole pouch)
Downhill: 120-140ml (8 or the whole pouch)

*If using in extreme heat (+35°C) simply top up if needed.

Specialized RapidAir Tire Sealant

54120-2100

$10.00

Our new RapidAir Tire Sealant was custom-designed in tandem with our new RapidAir tires and Roval wheels to be the fastest tire setup out there.

Through development, we learned that high-pressure, 24-30mm tires require a totally different formula to seal punctures. Our new exclusive mixture not only immediately seals punctures up to 3mm across a large range of temperatures, but unlike other sealants, RapidAir sealant will also keep its seal when you reinflate back to normal riding pressure.

Seals instantly with minimal pressure lost.
Compatible with CO2.
Performs in a wide temperature range (-20° – 70°C).
Creates the strongest plug after sealing.
No damage to bike parts.
Recommended sealant amount per tire: Tire size 24-26mm - 40ml 28-30mm - 50ml For Maximum performance, use 60ml for any 24-30mm