• All the travel in the world is useless without the proper shock tuning and kinematics. For the new Stumpjumper EVO design, we prioritized kinematic performance. Applying lessons learned while developing the Enduro, then following that with more than 1,000 hours of field and suspension lab development, we’ve not only improved the pedaling performance of the Stumpjumper, but we’ve made it more capable, agile, and lively. We increased anti-squat, so the suspension better resists pedal bob, and we further improved bump performance on square-edge hits. Bottom line? This thing shreds trails, not legs.
• The S-Sizing geometry of the new Stumpjumper EVO is our most progressive yet. Long, low, slack, short offset fork, steeper seat tube angle – these are requirements for modern progressive riding. But not everyone jibs the same way, which is why the geo on the new Stumpjumper EVO is fully adjustable with six different settings. You can adjust the BB height by 10mm, you can adjust your head angle by two-degrees, and you can make these adjustments independently of each other. Finally, if you want to go full-party mullet-mode, the EVO lets you run a 27.5-inch rear wheel mated with a 29-inch front.
• Rider-First Engineered™ frames use a size-specific approach to ride characteristics that ensures benchmark handling and flawless performance, regardless of frame or rider size. Whether you’re a jump-happy grom riding an S1, or a DH-fiend giant in need of the lengthy S6, you’ll experience the same ride traits – rail-sharp cornering and balanced front and rear stiffness – at the lightest-possible weight.
• We introduced the SWAT™ door on the Stumpjumper in 2016, adding room IN your frame for those “oh sh**t” necessities like pumps and spare tubes, and immediately rendering jersey pockets redundant. With the new Stumpjumper, we have increased the volume and added a SWAT™ Bladder, giving you an extra 22oz of water storage – the same size as a small water bottle – hidden in your downtube.
  

TECHNICAL SPECIFICATIONS

A disc brake compatible update of the original rear rack design where it all began for Blackburn back in 1975.

The Legacy, Updated

EX-1 dependability with disc brake compatibility

Specs
Weight  29.6 oz
Warranty  Subject to a limited lifetime warranty for the lifetime of the original purchaser. This warranty does not apply to damage due to heat, physical damage resulting from abuse, neglect, improper repair, improper fit, improper installation, improper care, accidents, failure to follow directions, alterations, misuse or use unintended by the manufacturer. Nor does it cover minor cosmetic damages due to normal "wear and tear" of the product.

This lightweight water bottle keeps your hydration at hand while you run, and carries your running essentials in the small attached pocket.

Features

We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.

• Compression Cap: Pop-top ensures your bottle won't leak

• Vacuum Insulation: Keeps beverages cold for 24 hours and hot for 6 hours

• Convenient Carry Loop: For water on the go• Sweat-Proof Insulation: Stay dry exterior for non-slip grip

• Fits in car cupholder

• Hand Wash Only

Short Features:

• Lightweight XC Short with all-way stretch fabric
• Chamois included
• Two side pockets with mesh liners
• Internal Security pocket
• Internal adjustable waist band
• Reflective logos

DO WHAT YOU LOVE, LONGER

When your solo ride turns into a weekend expedition with friends, the Add-On family (available for NV 2.0 and NV BASE 2.0) lets you increase your carrying capacity from two to four bikes in less time than it takes your friends to decide who gets to sit up front.

Features

Specs

The PRO Mini Tool 10 Functions is a compact multitool with 10 functions.

Designed to provide you with a better sports’ bicycle experience the PRO Mini Tool 10 Functions boasts 10 functions housed in a compact resin body. The hardened steel bits included in the tool are: Hex 2/2.5/3/4/5/6/8, Torque 25; as well as a PH2 and a Flat screwdriver.

HIGHLIGHTS

HIGHLIGHTS

HIGHLIGHTS

HIGHLIGHTS

• FACT carbon construction and aerodynamic profile compatible with the 2021 Tarmac SL7.
• Setback: 0/20mm.
• Sleek Di2 integration hides the Di2 junction box inside.
• Cylindrical aluminum head assembly adjusts fore-aft and tilt with an easy-access single bolt.

There is a place where function and form collide. Where practical becomes practically gallery–worthy. And this is the place where the Bones rack was conceived by Saris and famed Italian designer Fabio Pedrini. Awarded 4.5 out of 5 stars from Bicycling Magazine, Bones has proven that it's more than just another rear–mounted car rack, it's a tested statement of style, design, convenience and durability.

Features

• Arc-based design fits over most spoilers and separates bikes on different levels.
• Injection-molded arms and legs are the strongest on the market.
• Meets European Union regulations. View this product's European certification.
• Rubberized feet protect car and coated straps protect bike^.

Specs

• Carries 2 bikes (35lbs/bike).
• Spring buckle straps with vinyl-coated hooks.
• Strongest frame on the market.
• Built with 100% recyclable materials.
• Rust-free injection molded plastic.
• Articulated rubber feet to protect paint.
• Ratcheting anti-sway straps for a secure hold.
• Arc–based design separates bikes on different levels.
• Frame fits over most spoilers.
• Available in black.
• Compatible with most vehicles—consult the Saris Fit Guide for approved fits.
• Meets European Union regulations. View this product's European certification.
• Patents issued and pending.
• Lightweight at 9 lbs.

Kids' bikes. Women's frames. Tri-bikes. Small recumbents. The list goes on. Basically, if you've got it, chances are the Freedom can move it. The ratcheting straps keep your bike in place, while our Cuscino hold downs are gentle enough for a carbon frame. Say goodbye to worry and hello to peace of mind.

Features

• Rack adjusts to fit all bike frame sizes, up to 60 lbs. each
• Ratcheting straps keep any size bike secure
• Universal hitch fits 1 ¼" and 2" hitches
• Add wheel holders to your Freedom rack to fit Fat Tire bikes
• This rack fits a wheelbase up to 48" right out of the box. If your bike has a longer wheel base, you will need our long wheelbase bar.

When it comes to indoor bike trainers, the most frequently asked question is: how quiet is it? Taking this to heart, our Madison, Wisconsin-based team put this query under the microscope and set a goal to build a trainer so quiet, that the only sound is that of your drive train.

The result? A direct drive smart trainer that touts a sound specification of 59 decibels at 20 mph. In other words, the H3 is five times quieter than previous generations, making it the quietest smart trainer to ever leave our doors.

Following the Saris direct drive smart trainer legacy, the H3 features the same reliability and durability as its predecessors. Each H3 is made from cast and machined aluminum sourced from America’s heartland. Encased inside are components meticulously calibrated to measure power, speed and cadence, as well as a precision-balanced flywheel - all built to handle 2000 watts and replicate a 20% climbing grade.

Tested to withstand heavy training, the H3’s internal cooling system will keep the electromagnetic resistance system working – and accurate – long after your legs have given out.

Features

• Quieter Than Ever: all new drive system shaves decibels off previous generations.
• Precise Training: +/- 2% power accuracy.
• Controlled and Consistent: electromagnetic resistance provides a measured workout every time.
• Direct Drive Design: widest bike compatibility and eliminates wheel slips.
• No External Sensors Required: measures speed, cadence and power.
• Seamless Integration: connects to indoor cycling apps with dual ANT+ FE-C and Bluetooth FTMS standards.
• Zwift certified.
• Includes one month subscription to Rouvy virtual training app

Specs

• Noise level:59 decibels at 20 mph
• Power measurement accuracy: +/- 2%
• Maximum power output: 2000 watts at 20 mph
• Simulates a 20% climbing grade
• Fast response electromagnetic resistance
• Measures speed, cadence and power – no external sensors needed
• 20 lb precision balanced flywheel
• Integrated dual ANT+ FE-C and Bluetooth FTMS standards
• Built-in front wheel block
• Integrated carrying handle
• Compatible with Shimano 8-11 speed cassettes
• XD/XDR freehubs sold separately 
• Thru-axle compatible for rear hub widths of 142 mm or 148 mm.
• Quick-release compatible for rear hub widths of 130 mm and 135 mm.
• Compatible with a wide variety of devices and indoor cycling applications, including Rouvy, Zwift, TrainerRoad and many more. 
• Headless mode (powered on, not paired to any apps) lets you ride with a progressive resistance curve that matches the Fluid2.
• LED indicator lights communicate connectivity and more.
• Direct drive design directly connects the bicycle to the resistance unit, eliminating tire wear.
• Internal cooling technology ensures accurate ride data even during the hardest of workouts.
• Folding legs provide widest footprint of direct drive indoor bicycle trainers on the market for added stability and easy storage.
• Accessible and balanced handle allows for smooth, anyone-can-carry transit of the trainer.
• Maximum weight (rider and bike): 300 lbs.
• Cassette sold separately.

* Specifications are subject to change without notice

• Dual-scale 3" (76mm) oversized gauge has 0-30 PSI (2.2bar) zone for mountain tires, and 30-120 PSI (8.2bar) zone for road tires.
• SwitchHitter II head automatically switches between Schrader and Presta valves.
• Steel base and aluminum barrel construction.
• Ergonomic wing handle is overmolded for comfort.
• Includes spare rubber seal for head.
• Max pressure: 120 PSI (8.3bar)
• Volume-per-stroke: 365cc